RaceCapture-Pro MK2: Difference between revisions

 
(112 intermediate revisions by 5 users not shown)
Line 1: Line 1:
__NOTOC__==Introduction==
=RaceCapture/Pro Quick Links=
'''Autosport Labs RaceCapture is a powerful, multi-channel Data Acquisition and Control system for motorsport applications, presented at a break-through price.'''
* [[Image:add_to_cart.png|link=https://www.autosportlabs.com/racecapture_mk3_apex/]]


==Impact==
==Getting Started==
RaceCapture transcends most traditional "Data Logging" systems by virtue of its powerful processor and emphasis on outputs as well as inputs.  The ability to perform Data Acquisition while controlling other devices and systems, coupled with flexible end-user customization, will powerfully differentiate RaceCapture from other data logging systems.
*'''[[RaceCapturePro2_QuickStart|First time setup]]'''
*'''[[RaceCapturePro_Downloads|Software Downloads]]'''
*'''[[RaceCapturePro2_Hardware_Install|Hardware install]]'''
*'''[[RaceCapturePro2_TelemetryQuickstart|Live-streaming telemetry]]'''


==Significance==
==User Guides==
While the official application of RaceCapture is focused towards Race Car Data Acquisition, its powerful processor combined with a wealth of inputs and outputs also makes RaceCapture a general purpose automotive computer, one capable of handling many different tasks - limited only by your imagination. If the question is "Can RaceCapture do ...?" the answer will likely be 'Yes' and often with little to no external hardware support necessary.
*[[RCP_CAN|CAN bus / ECU integration guide]]
*[[RaceCapturePro2_hardware_guide|Hardware installation and operation guide]]
*[[RaceCapturePro2_3.5G_module_upgrade|3.5G Module Upgrade guide]]
*[[RaceCapture_App_User%27s_Guide|RaceCapture App User's guide]]
*[[RaceCapturePro_Sensors|Sensor guide]]
*[[RaceCapturePro_Lua_Scripting|Lua scripting guide]]


==At a Glance==
==Accessory / add-on guides ==
<center>
*[[SensorX|SensorX sensor breakout board assembly guide]]
[[Image:RaceCapture_flyer2.jpg]]
*[[CoilX|CoilX Tach interface to ignition coils guide]]
</center>
*[[RaceCapturePro2_GoProWiFi|WiFi module for automatic GoPro control guide]]


==Capabilities==
==How To==
*[[RaceCapturePro2_Enable_Predictive_Timing|How to: enable Predictive Timing]]
*[[RaceCapturePro2_OBD2|How to: enable OBD2 channels]]
*[[RaceCapturePro2_Calibrate_Sensor|How to: calibrate and configure an analog sensor]]
*[[RaceCapturePro2_ShiftLights|How to: sequential shift lights]]
*[[RaceCapturePro2_GPS|How to: get best GPS data]]
*[[RaceTracks|How to: submit a new race track]]
*[[RaceCapturePro_Analysis|How to: analyze your data]]
*[[Podium_Driver_Data_Analysis|How to: Analyze data in Podium to become a faster driver]]
*[[Add_TPMS_Data|How to: Add TPMS Data]]
*[[RaceCapturePro_FAQ|More FAQs and How-To's]]


<font size="3">Extreme flexibility comes with a powerful processor and a wealth of inputs and outputs. </font>
==By Car==
*[[RaceCapturePro2_vehicle_guide|Vehicle Guide]]


===Input and Output Channels===
==By Sensor Type==
RaceCapture offers 25 input and output channels, enough to handle complex logging and control tasks.
*[[RaceCapturePro2_RPM|RPM]]'''


* '''7 dedicated analog input channels'''
==Reference==
** ''Measure sensors or process input from other devices.''
*[[RaceCapturePro2_logfile_reference|Log file reference]]


* '''3 dedicated frequency input channels'''
==More Information==
** ''Measure RPM, wheel speed, or any kind of periodic pulse. One channel is optically isolated for direct connection to ignition coil.''
*[https://github.com/autosportlabs Source code]


* '''4 configurable analog,digital or frequency output channels'''
===Previous Hardware Versions===
** ''Control other systems or even override OEM sensors''
[[RaceCapturePro-MK1|RaceCapture/Pro MK1]]


* '''3 configurable digital channels, settable for input or output'''
=Quick Reference=
** ''Receive input from switches; or configure as output and use to activate accessories or drive indicator lamps''
Download a [http://www.autosportlabs.com/racecapturepro-mk2-quick-reference/racecapture-pro-mk2-quick-reference-sheet printable PDF]


* '''4 Axis Accelerometer Input: 3 channel accelerometer module plus Z-axis Gyro (+/- 2G per axis, 3G optional)'''
[[Image:RaceCapture-Pro MK2 quick reference sheet.jpg]]
** ''Measure and log 3D G-Force in real-time with one of the industry's most accurate and precise accelerometers.''
** ''Z-axis Gyroscope measures Yaw/Drift in real-time.''


* '''5Hz GPS module input'''
=RaceCapture/Pro MK2 Specifications=
** ''Add an external GPS module for course mapping''
*** ''Plot location, speed and time''


* '''Auxiliary serial expansion port'''
{| class="wikitable" style="text-align: left"
** ''Interface to future interactive dash/display''
!colspan="2"|Input / Output Channels
 
|-
===Logging===
!colspan="2"|'''Analog Inputs'''
* '''SD Memory card slot for data acquisition'''
|-
** ''Store up to 2GB of logging data''
|Channels
 
|8 (battery voltage dedicated on channel 8)
===Power===
|-
* '''Powerful 48MHz 32 bit ARM processor'''
|Voltage range
** ''Power to perform high resolution logging and running complex, user-defined logic''
|0-5v
 
|-
===Mechanical===
|Input impedance
* '''Compact, rugged design with good looks'''
|1M ohm
** Unit measures approximately 4 x 3 inches (100 x 82 mm)  
|-
* '''Easy to use screw terminal block for wiring'''
|Voltage protection
* '''On-board 'action' switch to start/stop logging (or other use)'''
|400v (intermittent)
* '''On-board Status LEDs'''
|-
 
|ADC precision
==The Intangibles==
|12 bit
===Flexibility===
|-
Unprecedented ability to customize logging and define behavior for user-outputs.
|Maximum sample rate
 
|1000Hz
* '''Customize logging channels and frequency'''
|-
* '''Control outputs based on the logic ''YOU'' define'''
|Mapping
* '''Powerful PC software to customize, view and analyze data'''
|Raw / Linear formula / Interpolated map
 
|-
===Infinite Possibilities===
!colspan="2"|'''Digital I/O'''
* '''Far more than a data-logging system: flexible Inputs and Outputs coupled with a powerful processor offers endless customization'''
|-
* '''Share configurations, tips and ideas with our online community'''
|Channels
* '''Open development process, frequent software updates and end-user customizable!'''
|3
 
|-
==Images==
|Output mode type
[[Image:RaceCapture_assembled_led_3quarter_640.jpg]]
|Open drain
[[Image:RaceCapture_assembled_terminal_block_3quarter_640.jpg]]
|-
<br>
|Output current capacity
[[Image:RaceCapture_GPS_tethered_640.jpg]]
|1A, inductive clamped
[[Image:RaceCapture_accel_tethered_640.jpg]]
|-
 
|Input mode voltage range
==Board Connections==
|0-12v
<center>
|-
[[Image:RaceCapture_assembled_connections_640.jpg]]
|Input voltage protection
</center>
|400v (intermittent)
==4 axis Accelerometer / Gyro module==
|-
<center>
|Maximum sample rate
[[Image:accel_revA_angle_640.jpg]]
|1000Hz
<br>Accelerometer module offers both tethered installation or internal installation via plug in header<br>
|-
</center>
!colspan="2"|'''Timer Inputs (RPM / Frequency)'''
<center>
|-
[[Image:accel_revA_with_cases_640.jpg]]
|Channels
<br>Accelerometer board with candidate enclosures<br>
|3
</center>
|-
<center>
|Input voltage protection
[[Image:accel_revA_tethered_zoom_640.jpg]]
|400v (intermittent)
<br>Accelerometer board tethered to RaceCapture unit<br>
|-
</center>
|Maximum sample rate
 
|1000Hz
<center>
|-
[[Image:RaceCapture_board_terminal_block_view_640.jpg]]
!colspan="2"|'''PWM/Analog outputs'''
[[Image:RaceCapture_led_view_640.jpg]]
|-
<br>
|Channels
Race Capture Hardware
|4
</center>
|-
|PWM output type
|push/pull
|-
|PWM output voltage range
|5v
|-
|Output current capacity
|50mA
|-
|Analog Output
|0-5v
|-
!colspan="2"|Voltage Reference
|-
|Output Voltage/Capacity
|5v / 1A
|-
!colspan="2"|Connectivity
|-
!colspan="2"|'''CAN Bus'''
|-
|CAN Channels
|2
|-
|CAN baud rate
|125K, 250K, 500K, 1M baud
|-
|CAN Termination
|120 ohms terminated, both channels
|-
|CAN filters
|14 per channel
|-
|Protocol support
|OBDII PID (CAN 1), custom CAN messaging
|-
!colspan="2"|'''Telemetry/Wireless'''
|-
|Cellular (North America)
|3.5G GSM 850/1900MHz (internal module, optional)
|-
|Cellular (Worldwide)
|2.5G Quad-band GSM (internal module, optional)
|-
|Bluetooth
|Bluetooth 2.0 (external module, optional)
|-
|Aux Serial
|Type External RJ11 / RS232 signaling
|-
|Max Baud Rate
|230400
|-
!colspan="2"|Inertial Motion Unit
|-
|Accelerometer Channels
|3 (X/Y/Z) (2G, 4G capable)
|-
|Gyro
|3 (Yaw/Pitch/Roll) (1000 degrees/sec)
|-
|GPS Type
|External active antenna
|-
|GPS Maximum sample rate
|50Hz
|-
|GPS accuracy
|2.5M CEP
|-
!colspan="2"|Storage
|-
|Micro SD
|Up to 32GB (SDHC) FAT32
|-
!colspan="2"|Configuration Capacity
|-
|Auto-detect track database
|240
|-
|Sectors per track
|20
|-
|Channel support
|200
|-
!colspan="2"|Physical
|-
|Dimensions
|5.3" (width) x 4.2" (height) x 1.2" (tall) / 135x110x31 mm(est)
|-
|Mounting area
|5.5"(140mm) x 4"(102mm)
|-
|Mounting holes
|Dual mounting points on 5" (127mm) centers - 0.125"-0.25" (3-6mm) fastener
|-
|Weight
|9oz / 255gm (est)
|-
|Power connection
|Terminal block: 1A max<br/>RJ45: 1A max
|-
|Power Consumption (max)
|Main System: 0.6W<br/>With Bluetooth: 1.6W<br/>With Cellular Telemetry: 8.6W<br/>With Cellular Telemetry and Bluetooth: 9.6W
|-
|Temperature
| Max Internal Temperature while operating: -40°C ~ 85°C / -40°C ~ 80°C (Telemetry module)
|}

Latest revision as of 19:12, 31 March 2019

RaceCapture/Pro Quick Links

  • Add to cart.png

Getting Started

User Guides

Accessory / add-on guides

How To

By Car

By Sensor Type

Reference

More Information

Previous Hardware Versions

RaceCapture/Pro MK1

Quick Reference

Download a printable PDF

RaceCapture-Pro MK2 quick reference sheet.jpg

RaceCapture/Pro MK2 Specifications

Input / Output Channels
Analog Inputs
Channels 8 (battery voltage dedicated on channel 8)
Voltage range 0-5v
Input impedance 1M ohm
Voltage protection 400v (intermittent)
ADC precision 12 bit
Maximum sample rate 1000Hz
Mapping Raw / Linear formula / Interpolated map
Digital I/O
Channels 3
Output mode type Open drain
Output current capacity 1A, inductive clamped
Input mode voltage range 0-12v
Input voltage protection 400v (intermittent)
Maximum sample rate 1000Hz
Timer Inputs (RPM / Frequency)
Channels 3
Input voltage protection 400v (intermittent)
Maximum sample rate 1000Hz
PWM/Analog outputs
Channels 4
PWM output type push/pull
PWM output voltage range 5v
Output current capacity 50mA
Analog Output 0-5v
Voltage Reference
Output Voltage/Capacity 5v / 1A
Connectivity
CAN Bus
CAN Channels 2
CAN baud rate 125K, 250K, 500K, 1M baud
CAN Termination 120 ohms terminated, both channels
CAN filters 14 per channel
Protocol support OBDII PID (CAN 1), custom CAN messaging
Telemetry/Wireless
Cellular (North America) 3.5G GSM 850/1900MHz (internal module, optional)
Cellular (Worldwide) 2.5G Quad-band GSM (internal module, optional)
Bluetooth Bluetooth 2.0 (external module, optional)
Aux Serial Type External RJ11 / RS232 signaling
Max Baud Rate 230400
Inertial Motion Unit
Accelerometer Channels 3 (X/Y/Z) (2G, 4G capable)
Gyro 3 (Yaw/Pitch/Roll) (1000 degrees/sec)
GPS Type External active antenna
GPS Maximum sample rate 50Hz
GPS accuracy 2.5M CEP
Storage
Micro SD Up to 32GB (SDHC) FAT32
Configuration Capacity
Auto-detect track database 240
Sectors per track 20
Channel support 200
Physical
Dimensions 5.3" (width) x 4.2" (height) x 1.2" (tall) / 135x110x31 mm(est)
Mounting area 5.5"(140mm) x 4"(102mm)
Mounting holes Dual mounting points on 5" (127mm) centers - 0.125"-0.25" (3-6mm) fastener
Weight 9oz / 255gm (est)
Power connection Terminal block: 1A max
RJ45: 1A max
Power Consumption (max) Main System: 0.6W
With Bluetooth: 1.6W
With Cellular Telemetry: 8.6W
With Cellular Telemetry and Bluetooth: 9.6W
Temperature Max Internal Temperature while operating: -40°C ~ 85°C / -40°C ~ 80°C (Telemetry module)