map_chan(atsId, data, 6, 1, 1, 0)
map_chan(ctsId, data, 7, 1, 1, 0)
2 KB (170 words) - 06:01, 18 December 2016
--CAN channel to listen on. 0=first CAN channel, 1=second
--1 for Big Endian (MSB) mode; 0 for Little Endian mode (LSB)
2 KB (228 words) - 05:23, 27 February 2015
...riority is 0 - 2, with 0 = normal priority used for pit-to car alerts, and 1 - 2 reserved for future use.
* Priority 1 address: 0xA102 (41218) / 0xA103 (41219)
2 KB (268 words) - 01:19, 8 September 2020
CAN_chan = 0 -- 0=first CAN channel, 1=second
map_chan(rpmId, data, 0, 2, 1, 0)
3 KB (308 words) - 01:47, 31 July 2015
==Approach #1==
575 bytes (102 words) - 14:16, 23 May 2023
...shift light is by using the PWM / Analog output channels to trigger a 3 + 1 shift light output. In this case, we used 3 of the outputs to control the 3
* Shift light boards connected to PWM / Analog out 1 - 3; flash alert LED to the 4th output
2 KB (283 words) - 19:48, 19 December 2014
* Bytes: 1,2 (little endian)
* Precision: 0.1
2 KB (216 words) - 21:28, 28 February 2015
...nds, using the Unix time epoch of 1/1/1970 (number of milliseconds since 1/1/1970)
"Interval"|"ms"|0|0|1,"Utc"|"ms"|0|0|1,"Battery"|"Volts"|0.0|50.0|1,"AccelX"|"G"|0.0|0.0|25,"AccelY"|"G"|0.0|0.0|25,"AccelZ"|"G"|0.0|0.0|25,"Ya
3 KB (362 words) - 20:04, 10 December 2023
...CAN Low to the corresponding CAN High / CAN Low on the RaceCapture/Pro CAN 1 channel. See the [CAN_Bus_Integration|CAN integration guide]] for wiring de
--CAN channel to listen on. 0=first CAN channel, 1=second
5 KB (554 words) - 04:51, 21 July 2016
|1
|1
5 KB (585 words) - 03:34, 16 July 2015
** Find one that uses an 1/8" jack to plug into a conventional microphone connection. ''Do not use a U
* '''1/4" stereo phono plug'''
4 KB (625 words) - 06:44, 15 August 2012
...e="text-align: center; background: transparent; margin-left: 10%;" border="1"
|1.0||16
289 bytes (28 words) - 07:28, 23 July 2010
*'''Cluster 1:''' Connect A1 to ground
User outputs 1-4 + shift light output can be used to control the sequential shift light.
2 KB (294 words) - 07:08, 26 June 2008
CAN_chan = 0 --CAN channel to listen to 0=first CAN channel, 1=second
be_mode = 1 --1 for Big Endian (MSB) mode; 0 for Little Endian mode (LSB)
7 KB (799 words) - 16:39, 8 November 2016
addAnalog(1,'Batt', 10, 2, 0, 5, 'V', 1, 0)
addFreq(5, 'RPM', 10, 0, 0, 10000, '', 60, 1)
4 KB (517 words) - 16:32, 8 May 2018
*Processor (Pin 1 GND, Pin 16 +5v)
*MAP sensor ( pin 2 is GND, pin 3 is +5v. "dot" is next to pin 1 on solder side)
2 KB (372 words) - 00:38, 4 February 2007
...dforums.net/showthread.php?607-Autosport-Labs-RaceCapture&p=50287&viewfull=1#post50287 this thread] for extensive information and discussion on the EvoX
chBoost = addChannel("Boost", 100, 1, -14.5, 43.5, "PSI")
5 KB (660 words) - 22:45, 27 October 2017
=====1) Go to the YouTube video page and click share=====
934 bytes (136 words) - 23:26, 6 July 2023
...connections from the Sequential Shift light board to Digital Input/Output 1,2,3 respectively.
if r > 5000 then setGpio(2,1) else setGpio(2,0) end
3 KB (464 words) - 05:30, 3 March 2015
...AN2. Typically CAN1 is used, so you would use '''CAN 1 High''' and '''CAN 1 Low''.
...ness. Typically CAN1 is used, so you would use '''CAN 1 High''' and '''CAN 1 Low''.
3 KB (542 words) - 14:36, 31 March 2022
...wire your CAN device to either CAN 1 or CAN 2 on the Molex connector. CAN 1 is recommended as that is what most Presets defaults to if your device has
...et cable (wired in T-568B) and cut one end off. To put the device on CAN 1 you would solder the CAN device's CAN High wire to the Orange wire for Pin
4 KB (774 words) - 19:50, 5 January 2021
* shiftx3.stl : Main housing for ShiftX3 - Qty 1 needed
* shiftx3_back_3dprint: Back cover for housing - Qty 1 needed
3 KB (488 words) - 04:44, 11 January 2019
...d rates. You can easily build an RJ45 CAN Crossover cable to swap the CAN 1 and CAN 2 channel wiring for that CAN device/system. You can either perma
...you will probably have to go into each channel and change it from CAN Bus 1 to CAN Bus 2.
4 KB (604 words) - 19:51, 5 January 2021
* 0.1 degree timing resolution
* Initial support for 36-1 trigger wheel; other trigger wheel configurations to follow
3 KB (343 words) - 04:45, 28 April 2014
...t/mjlj/mjljConfig_v3.2.1.exe PC Configuration/Tuning software, version 3.2.1] (requires firmware V2.8)
...ist/mjlj/mjljConfig_v3.1.2.exe PC Configuration/Tuning software, version 3.1.2 beta 3]
3 KB (417 words) - 03:48, 5 April 2007
|1 (White)
|1 (Orange / White)
3 KB (496 words) - 14:55, 21 June 2019
* 3-2-1 tubular manifold
* 1.6L 4AG 7 rib block
2 KB (219 words) - 06:01, 28 September 2008
...ator for Ford EDIS ignition module. This software generates a simulated 36-1 signal on the PC parallel port, to allow bench testing of the full EDIS / M
664 bytes (106 words) - 23:00, 18 May 2007
...tGpio(1,1) , it will stay on until you explicitly turn it off (ie. setGpio(1,0)
** state: (int / ''(since 2.10.0)'' bool) 1 / true = output active; 0 / false = output inactive
5 KB (874 words) - 19:48, 5 January 2021
* The power plug is a 5.5x2.5mm. Certain 5.5x2.1 may also work.
* CAN bus 1 and 2 are bridged together; you can disable this by breaking the PCB jumper
6 KB (867 words) - 01:58, 16 July 2019
...t/mjlj/mjljConfig_v3.3.1.exe PC Configuration/Tuning software, version 3.3.1] (Requires controller firmware 3.3.x)
...bs.net/asl_dist/mjlj/mjlJunior_V3.3.1.zip Controller Firmware, version 3.3.1] (includes firmware programming software)
4 KB (578 words) - 02:13, 3 September 2010
'''1 pole Selector Switch (chose one):'''
*[https://www.ebay.com/itm/SP4T-Rotary-Switch-MFR01-1-Pole-4-Position-Switch-and-27mm-Knob/111832631148 4 Position Switch] - $6
5 KB (823 words) - 20:00, 5 January 2021
...s 2, you will have to go into each TPMS channel and change it from CAN Bus 1 to CAN Bus 2.
..., after applying the Preset, you will have to go in and change the CAN Bus 1 to CAN Bus 2 for each TPMS channel.
6 KB (951 words) - 19:38, 5 January 2021
--CAN channel to listen on. 0=first CAN channel, 1=second
tempId = addChannel("EngineTemp", 1, 0, 0, 255, "F")
10 KB (1,353 words) - 15:36, 6 May 2016
local temp2 = getAnalog(1)
if rpm > 5000 then shiftLeds = shiftLeds + 1 end
3 KB (330 words) - 21:33, 10 January 2015
* 3-2-1 tubular manifold
* 1.6L 4AGE 7 rib block
2 KB (258 words) - 18:37, 28 September 2008
...wo CAN bus networks to our [[#Powered_dual_CAN_hub|Powered Dual CAN Hub]]. 1 meter length.
M8-4P male to M8-4P female cable extends a CAN bus network. Available in 0.5, 1, 2, 3, and 4 meter lengths. [[Image:add_to_cart.png|link=https://www.autosp
14 KB (1,931 words) - 14:21, 30 August 2023
===Analog Inputs 1-7===
===Analog/Frequency Outputs 1 - 4===
7 KB (1,100 words) - 04:20, 5 April 2016
===Analog Inputs 1-7===
===Analog/Frequency Outputs 1 - 4===
7 KB (1,169 words) - 14:55, 19 March 2018
** 1: Fix in progress
** < 1 Ideal
3 KB (428 words) - 20:12, 27 August 2022
If the crank pulley has extra material to machine the necessary 36-1 pattern, identical results can be obtained compared to the 'traditional' te
The following image is an aftermarket VW pulley, modified with the 36-1 pattern using round holes realize the trigger wheel pattern.
4 KB (551 words) - 07:01, 23 July 2010
* Pin 1 = Power in (+8V to +24V), 40mA
| 1
11 KB (1,618 words) - 21:38, 17 April 2015
...agnostic connector at the back of the engine compartment (black wire, Pin #1)
*1.33v = 25 (1/4)
5 KB (690 words) - 23:12, 29 June 2020
...cript shown below will output all CAN bus messages received on CAN channel 1 to the RaceCapture/Pro log window.
...onnections. Ensure you're connected to the CAN bus used in the script (CAN 1 is the default for the script).
3 KB (423 words) - 18:04, 27 February 2020
* Connect Coil 1,2,3 and 4 to the drive signals to each coil packs as necessary.
986 bytes (145 words) - 17:38, 13 March 2015
...d protected 0-5v sensor inputs and can broadcast the sensor values between 1 and 255Hz. It also provides a 0.5A 5v reference for powering sensors.
* 1" shrink tube for installation
12 KB (1,791 words) - 17:59, 6 September 2020
===== 1) Download the Yi Action app for [https://play.google.com/store/apps/details
4 KB (601 words) - 20:10, 5 January 2021
| Frequency / RPM input 1
| Analog Input 1
9 KB (1,398 words) - 23:07, 4 April 2018
| Frequency / RPM input 1
| Analog Input 1
11 KB (1,655 words) - 21:32, 19 July 2021
{| border=1
{| border=1
10 KB (1,700 words) - 15:25, 31 March 2007
